At a glance
- Sport
- Baseball and Softball
- Skill
- Baserunning
- Ages
- 6U to 12U
- Players
- The whole team, single file at first base
- Time
- About 10 minutes
- Level
- Beginner
- Equipment
- First, second and third base, 5 to 6 cones, Batting helmets
- Indoors
- Needs a field
Going from first to third on a single depends on the turn at second. A runner who runs straight at second base and then turns has to swing out toward the shortstop and loses ground. A runner who bows out a few strides before the base touches it on the inside corner and is already headed for third.
Cones make that path easy to see. Set a short arc on the outfield side of the base line before second, and players follow it until the shape feels normal. It is a good next step after the run-through and rounding-first drills.
Setup
- Use a field with first, second and third base set out.
- Place a cone to mark the lead off first base for your age group.
- Lay out an arc of 6 to 8 cones on the outfield side of second base, a few feet behind it: start a little before the base on the first base side, curve over the back of the base and finish a little past it on the third base side.
- Line runners up at first base. The coach stands near second, where the turn can be seen.
How to run it
- The first runner gets into a lead at the cone, or on the base where leads are not allowed.
- On the coach's call of a hit to the outfield, the runner breaks for second.
- The runner swings out to the outfield side of the base line on the way from first and curves over the top of second base, running just inside the arc of cones.
- The runner leans in and touches the inside corner of second base with whichever foot arrives.
- From second the runner runs a straight line to third, then jogs off to the side, and the next runner steps up.
Coaching points
- Bow out before second, not after. The turn is done by the time the runner touches the base.
- Touch the inside corner of the bag and push off it toward third.
- Lean the body in toward the infield through the turn.
- After second base, the path to third is a straight line.
- Once the runner rounds second, pick up the third base coach; add one when players are ready.
Common mistakes
- Running straight to second base, then swinging out toward the shortstop after touching it.
- Looking down to find the base and breaking stride.
- Bowing out so wide around the cones that the runner adds steps.
Printable drill card
Take this drill to the field: the setup, steps, coaching points and equipment on one card, with the video's address to find it again. Free, no account needed.
Print the drill cardSmaller: half page or quarter page (PDF).
By age
Coach pitch
Skip the lead and start runners on the base. Put the cones close together so the curve is easy to follow, and walk it once before running it.
10U and 12U
Add a coach who points to an outfield spot when the runner breaks, and a third base coach who waves the runner on or holds up a hand, so runners read and listen while they turn.
Next: Free wristband generator.
Frequently Asked Questions
Which foot should a runner use to touch second base on a turn?
The one that arrives in stride. Aim for the inside corner of the base. Changing steps to get a certain foot onto the bag slows the runner down.
More drills
Start free. Upgrade when your season needs it.
The free plan includes one team and one of each document type, with no license fee and no credit card. Paid plans start at $2.50 a month billed annually, cancel anytime.
No credit card required. Free plan available.
