Baseball drill

Sacrifice bunt target lane drill

Off a machine or a coach, hitters start in a game stance, square on the feeder's cue and bunt each pitch into a cone lane up the third or first base line, switching sides every pitch. It builds a timed sacrifice and a bat angle that puts the ball where it is called.

A youth baseball hitter squared to bunt beside home plate as a coach behind a screen out toward the mound shows the ball, with lanes of orange cones down both foul lines
Video by ATEC Sports on YouTube. The write-up below is ours.

At a glance

Sport
Baseball and Softball
Skill
Bunting
Ages
10U to High school
Players
3 to 5 per group, one hitting and the rest retrieving
Time
About 12 minutes
Level
Intermediate
Equipment
A pitching machine or a coach behind a screen, A bucket of balls, Bats and batting helmets, Cones for two lanes
Indoors
Needs a field

A sacrifice bunt has two jobs: square in time and put the ball where the defense has the hardest play. This drill works on both. The hitter starts in a real batting stance and squares only when the feeder gives the cue, then has to bunt into a lane up one line, and the next pitch goes to the other line.

Lanes make the target clear and the switching keeps the hitter changing the bat angle instead of grooving one bunt. Use it as a cage or field station during batting practice, with a group of three to five rotating every six to eight bunts.

Setup

  • Set up a coach behind a screen straight out in front of the plate, where the pitcher would stand but only about 15 feet away, or a machine at a normal pitching distance.
  • Make a lane with two rows of cones down the third base line, from about 10 to 25 feet out from the plate, and another down the first base line, where a good sacrifice would stop.
  • One hitter at the plate with a helmet; the rest of the group gathers balls safely away from the line of the pitch.

How to run it

  1. The hitter starts in a normal batting stance.
  2. The feeder lifts the ball to show it before feeding it, as a pitcher's release would. That is the hitter's cue to square.
  3. The hitter turns the feet, widens the base and sets the bat level at the top of the zone.
  4. The hitter catches the ball on the barrel out front with the angle set for the called lane.
  5. Switch to the other lane on the next pitch. Six to eight bunts, then rotate.

Coaching points

  • Wait for the cue. Squaring too early in a game lets the defense crash.
  • Get low with the knees and hips; do not drop the bat head to reach a low pitch.
  • Keep the barrel a little above the handle so the ball does not pop up.
  • Loosen the top hand at contact to take the speed off and keep the ball in the lane.

Common mistakes

  • Stabbing at the pitch instead of letting it meet a quiet bat.
  • Bending only at the waist, which leaves the hitter stuck on a low strike.
  • Squaring before the cue.
  • Setting the lanes so wide that a poor bunt still counts.

Printable drill card

Take this drill to the field: the setup, steps, coaching points and equipment on one card, with the video's address to find it again. Free, no account needed.

Print the drill card

Smaller: half page or quarter page (PDF).

By age

10U and 12U

Use slow front toss instead of a machine and wide lanes. Count any bunt that rolls into the lane.

14U and up

Speed the machine up, narrow the lanes, and make the hitter run the first few steps after each bunt.

Next: Free lineup card generator.

Frequently Asked Questions

Can I run this bunting drill without a pitching machine?

Yes. A coach throwing strikes from behind a screen works. Show the ball before each throw so the hitter has the same cue to square.

More drills

Start free. Upgrade when your season needs it.

The free plan includes one team and one of each document type, with no license fee and no credit card. Paid plans start at $2.50 a month billed annually, cancel anytime.

See Pricing

No credit card required. Free plan available.