How to keep score in baseball, in short
Print one sheet for each team, then for every plate appearance:
- Write the batting order down the left with each player's jersey number and position number (1 pitcher to 9 right field).
- Mark the count in the box: balls in the three bottom squares, strikes in the two top ones.
- If the batter reaches, circle the hit (1B to HR) or write BB, HP, E or FC, and trace each base they reach. Shade the diamond when they score.
- If the batter is out, write the play with the fielders' numbers (K, 6-3, F8) and circle the out number.
- After the third out, rule a line under the box. After the game, total AB, R, H, BB and RBI and check the two sides balance.
Just need a blank one? Get the free printable baseball score sheet
What you need
Keeping score takes a pencil, an eraser and one score sheet for each team. A free printable baseball score sheet works for any game; the PDF's second page is a one-page key to keep in the book. The sheet has a row for each spot in the batting order and a column for each inning, and every box in the grid is one plate appearance: a small diamond for the bases, five little squares for the count, and corners for the out number and the RBIs.
This guide follows the conventions most scorebooks share and the ones printed on our sheet. Scorers differ on small things (some write F for every fly ball, some use L and P for line drives and pop-ups), and what matters is that you score the same way all season, so anyone who picks up the book can read it.
Before the first pitch: the lineup
Write the batting order down the left side, one player per row: the jersey number in the # column, the name, and the position in POS. Use the position's number, not its letters, because you will use the same numbers in every play you write:
- 1 pitcher, 2 catcher, 3 first base, 4 second base, 5 third base
- 6 shortstop, 7 left field, 8 center field, 9 right field
- DH for a designated hitter, who bats but does not field
Shortstop is 6 and second base is 4, which trips up every new scorer; the position numbers page has the reason. Leave the SUB line under each name empty for now. When a substitute comes in, write them there and draw a heavy line on the grid where they entered, so the boxes before the line belong to the starter.

Fill in the other team's lineup card on the second sheet the same way, and you are ready.
Inside each box
Every plate appearance goes in the box where that batter's row meets the inning's column. Five things can go in it.

- The count. Mark each ball in one of the three bottom squares and each strike in one of the two top ones. A foul ball with two strikes gets a tick beside them, so you can count pitches later.
- How the batter reached. Circle 1B, 2B, 3B or HR for a hit, or BB for a walk. Write HP for a hit by pitch, E with the fielder's number for an error (E6 is the shortstop), and FC for a fielder's choice.
- The bases. Draw a line along the diamond for each base the runner reaches, and beside each line write how they got there. Shade the diamond when the runner scores.
- The out. If the batter is out, write the play in the middle of the diamond and circle the out number (1, 2 or 3) in the corner.
- RBIs. Put a dot in the lower-left corner for each run the batter drove in. An RBI goes to the batter whose plate appearance scored the run, though not when the run scores on a ground-ball double play or on an error.
Writing the outs
An out is written as the fielders who made it, in order. A ground ball to the shortstop who throws to first is 6-3. A ball the first baseman fields and steps on the bag himself is 3U, for unassisted. A fly ball caught by the center fielder is F8.
- K strikeout swinging; a backwards K is a strikeout looking (why it is written backwards)
- 6-3, 4-3, 5-3 ground outs; 1-3 the pitcher to first
- F8 fly out, L6 line out, P4 pop-up, FF2 a foul fly caught by the catcher
- SF9 a sacrifice fly to right, SAC 1-3 a sacrifice bunt the pitcher fielded
- DP 6-4-3 a double play, shortstop to second to first; TP a triple play
- CS 2-6 caught stealing, catcher to shortstop; PO 1-3 picked off, pitcher to first

The fielders in an out are also where putouts and assists come from at the end of the game: the last number made the putout, and every number before it gets an assist.
Moving the runners
Once a batter is on base, they belong to the box they started in, and every base they take is drawn in that box, not the box of whoever is batting. Beside each line, write what moved them:
- SB a stolen base
- WP a wild pitch, PB a passed ball, BK a balk
- E2 an error, with the fielder's number
- #4 the lineup spot whose plate appearance moved them, so a runner who scores on the fourth batter's double has #4 beside home

Writing the lineup spot is what lets you answer the questions that come up later: who drove in that run, and was it earned?
A half-inning, box by box
Here is one half-inning, the way it goes in the book.
- Batter 1: singles to left, steals second, scores on batter 3's double. Write: Circle 1B, line to first; SB beside second; #3 beside third and home; shade the diamond.
- Batter 2: takes strike three. Write: A backwards K in the diamond, circle out 1.
- Batter 3: doubles to right-center, the run scores; goes to third on a wild pitch. Write: Circle 2B, lines to first and second; a line to third with WP beside it; one RBI dot.
- Batter 4: grounds out, shortstop to first. Write: 6-3 in the diamond, circle out 2.
- Batter 5: flies out to center. Write: F8 in the diamond, circle out 3, and rule a line under the box.

Batter 3 ends the inning on third, so their box shows a runner left on base: lines to third, no shading. The line under batter 5's box tells you where the next inning starts. Then fill in the inning's total at the bottom of the column: one run, two hits, no errors, one left on base.
If more than nine batters come up in one inning, carry on in the next inning's column and cross out its number, then use the column after that for the next inning. Every scorer bats around eventually, so don't panic.
After the game: the totals
At the end of each row, total the batter's line:
- AB at-bats: every trip to the plate except a walk, a hit by pitch, a sacrifice bunt, a sacrifice fly or catcher's interference. A plate appearance counts all of them; an at-bat doesn't.
- R runs scored, H hits, BB walks and RBI runs batted in.
Then prove the box. For each team, at-bats plus walks, hit batters, sacrifices and catcher's interference should equal runs, plus the runners left on base, plus the other team's putouts. If the two sides don't match, a plate appearance is missing or counted twice, and it is easier to find tonight than next week.
From the totals, the season's numbers are a sum away. The batting average calculator, on-base percentage calculator and ERA calculator take the numbers straight from the book, and a box score is the same totals in a table.
Keeping the pitchers' line
Most books keep each pitcher's line at the bottom of the sheet: innings pitched, hits, runs, earned runs, walks and strikeouts. Count the pitches as you go, too. The marks in each box add up to most of them, and the pitch count tracker keeps a running total on your phone. A pitching chart tracks each pitch's type and result.
Who decides hit or error?
The scorer decides, play by play, whether a batter got a hit or reached on an error, and whether a run was earned. In a youth game that is usually a parent with the book, and the umpire has no part in it. Your league may have its own scoring rules or an official scorer whose book counts; if it does, follow their rulings, and check your league's rulebook for anything this guide doesn't cover.
Score sheets with your team on them
Set the innings and the number of hitters, add your roster and team colors, and print the scoring key under the grid or as a back page, from one free account.
Full play-by-play scoring. Record every at-bat in traditional scorekeeping notation
Game summary totals. Roll up the box score automatically from the sheet
Archive-quality format. Produce a record worth keeping in the team scorebook
Fully customizable. Add your team colors or your team's logo.
4 ready-made templates included
- Basic Score Sheet (9 innings/9 hitters)
- Basic Score Sheet (9 innings/15 hitters)
- Score Sheet with Scoring Key
- Score Sheet with Second Page "How to Score Sheet"
No credit card required. Free plan available.
Frequently Asked Questions
What do the numbers mean on a baseball score sheet?
Each fielder has a number: 1 pitcher, 2 catcher, 3 first base, 4 second base, 5 third base, 6 shortstop, 7 left field, 8 center field and 9 right field. An out is written as the numbers of the fielders who made it, so 6-3 is a ground ball to the shortstop thrown to first, and F8 is a fly ball caught in center.
Why is a strikeout a K?
S was already taken (for a sacrifice, and in early scorebooks for a single), so scorers used the last letter of "struck." A K written backwards means the batter took strike three without swinging.
Does a walk count as an at-bat?
No. Walks, hit batters, sacrifice bunts, sacrifice flies and catcher's interference are plate appearances but not at-bats, so they don't lower a batting average. Every other trip to the plate, including reaching on an error or a fielder's choice, is an at-bat.
How do I score a runner who moves up on someone else's hit?
Draw the line in the runner's own box, not the batter's, and write the batter's lineup spot beside it: #4 means the fourth hitter's plate appearance moved them. If they score, shade the diamond and give the batter an RBI dot.
What if we bat around in an inning?
Carry on in the next inning's column and change its inning number, then use the column after it for the next inning. That's one reason the free generator can print up to ten innings on a sheet.
Is there a printable key to the symbols?
Yes. The free baseball score sheet PDF has a full "How to keep score" page after the sheet, and a score sheet made in the free score sheet generator can print a compact key under the grid.
More documents to go with your score sheets
Wristband Signs
Offense, defense and pitch-calling sign cards your players can’t miss.
Fully customizable. You determine the number of grids and their dimensions.
Cut-to-fit dimensions. Customize the height and width to fit your team's wristbands.
Personalize. Print your players' names/numbers on their card.
Mobile-friendly. Our software is designed to work on phones, tablets and desktops.
- Blank
- 12U/14U Offense
- 12U/14U Pitching Baseball
- 12U/14U Pitching Softball
- 16U/18U Offense
- 16U/18U Pitching Baseball
- 16U/18U Pitching Softball
- College Offense
- College Pitching Baseball
- College Pitching Softball
- Standard Defense
Lineup Cards
Create professional batting order lineup cards for exchange with umpires and opposing coaches. Clean, regulation-ready format with room for substitutes.
Regulation-ready format. Using DP/Flex? DH? EH? Two players in one slot? We got you covered.
Easy drag-and-drop interface. Drag and drop to build and rearrange your lineup (desktop only).
Fully customizable. Add your logo and team colors. Print your roster on the card.
Flexible. Print up to four cards on a single sheet of paper. Set between 7 to 12 starters.
- Blank Lineup Card (2 per sheet)
- Blank Lineup Card (3 per sheet)
- Lineup Card with Roster (2 per sheet)
- Lineup Card with Roster (3 per sheet)
Pitching Charts
Track pitch sequences, hitter outcomes, and fielded-ball locations on a printable chart designed for in-game pitching notes.
Pitch-by-pitch tracking. Log each pitch as the at-bat unfolds
Hitter outcome boxes. Record how each at-bat ended without breaking your flow
Pitch location reference. Mark where the ball was hit or where the pitch landed
Game note workspace. Capture extra scouting notes right on the same chart
- Standard Pitching Chart
- Pitching Chart with Notes Section
Start free. Upgrade when your season needs it.
The free plan includes one team and one of each document type, with no license fee and no credit card. Paid plans start at $2.50 a month billed annually, cancel anytime.
No credit card required. Free plan available.

























